d a t a sh eet supersedes data of september 2004 2008 sep 01 ferroxcube pts14/8 pt, pts, pts/i cores and accessories
2008 sep 01 1043 ferroxcube pt, pts, pts/i cores and accessories pts14/8 (1408ths) core sets effective core parameters symbol parameter value unit (i/a) core factor (c1) 1.02 mm ? 1 v e effective volume 495 mm 3 i e effective length 22.5 mm a e effective area 22.0 mm 2 a min minimum area 19.9 mm 2 m mass of set 2.5 g handbook, halfpage 5.8 0.2 cbw110 8.3 0.15 8.6 min. 11.8 0.2 14.05 0.25 3.1 0.075 5.9 0.1 9.4 0.15 fig.1 pts14/8 core set. dimensions in mm. core sets for general purpose transformers and power applications clamping force for a l measurements, 15 15 n. grade a l (nh) e air gap ( m) type number 3c81 63 3% 51 590 pts14/8-3c81-a63 100 3% 81 340 pts14/8-3c81-a100 160 3% 130 190 pts14/8-3c81-a160 250 3% 204 110 pts14/8-3c81-a250 315 5% 257 90 pts14/8-3c81-a315 2330 25% 1900 0 pts14/8-3c81 3c91 2330 25% 1900 0 pts14/8-3c91 3f3 63 3% 51 590 pts14/8-3f3-a63 100 3% 81 340 pts14/8-3f3-a100 160 3% 130 190 pts14/8-3f3-a160 250 3% 204 110 pts14/8-3f3-a250 315 5% 257 90 pts14/8-3f3-a315 1625 25% 1320 0 pts14/8-3f3
2008 sep 01 1044 ferroxcube pt, pts, pts/i cores and accessories pts14/8 (1408ths) core sets of high permeability grades clamping force for a l measurements, 15 5n. properties of core sets under power conditions note 1. measured at 60 c. bobbins and accessories for coil formers, winding data and mounting parts, see data sheet, ?p14/8? and ?pt14/8? , but ?area product? is different. winding data and area product (for pts14/8) for 6-pins pt14/8 coil former winding data and area product (for pts14/8) for cp-p14/8 coil former grade a l (nh) e air gap ( m) type number 3e27 4370 25% 3540 0 pts14/8-3e27 grade b (mt) at core loss (w) at h = 250 a/m; f = 25 khz; t=100 c f = 25 khz; = 200 mt; t = 100 c f = 100 khz; =100mt; t = 100 c f = 100 khz; = 200 mt; t = 100 c f=400khz; =50mt; t = 100 c 3c81 320 0.1 ?? ? 3c91 320 ? 0.026 (1) 0.19 (1) ? 3f3 315 ? 0.054 ? 0.94 number of sections minimum winding area (mm 2 ) nominal winding width (mm) average length of turn (mm) area product ae x aw (mm 4 ) type number 1 7.9 4.1 29.2 174 cpv-pt14/8-1s-6p number of sections winding area (mm 2 ) minimum winding width (mm) average length of turn (mm) area product ae x aw (mm 4 ) type number 1 8.8 4.1 28.9 194 cp-p14/8-1s 22 4.0 2 1.85 28.9 2 x 88.0 cp-p14/8-2s b ? b ? b ? b ?
2008 sep 01 1045 ferroxcube pt, pts, pts/i cores and accessories pts14/8 (1408ths) winding data and area product (for pt s14/8) for cp-p 14/8-a coil former winding data and area product (for pts14/8) for 4-pins p14/8 coil former for pcb mounting winding data and area product (for pts14/8) for 6-pins p14/8 coil former for pcb mounting number of sections minimum winding area (mm 2 ) nominal winding width (mm) average length of turn (mm) area product ae x aw (mm 4 ) type number 1 9.4 4.5 29.0 207 cp-p14/8-1s-a 2 2 x 4.32 2 x 2.0 29.0 2 x 95.0 cp-p14/8-2s-a 33 2.19 3 1.2 29.0 3 x 48.2 cp-p14/8-3s-a number of sections minimum winding area (mm 2 ) nominal winding width (mm) average length of turn (mm) length of pins (mm) area product ae x aw (mm 4 ) type number 1 8.65 4.4 29.0 4.4 190 cpv-p14/8-1s-4spd 1 8.65 4.4 29.0 6.8 190 cpv-p14/8-1s-4spdl 22 3.87 2 2.0 29.0 4.4 2 x 85.1 cpv-p14/8-2s-4spd 22 3.87 2 2.0 29.0 6.8 2 x 85.1 cpv-p14/8-2s-4spdl number of sections minimum winding area (mm 2 ) nominal winding width (mm) average length of turn (mm) length of pins (mm) area product ae x aw (mm 4 ) type number 1 8.65 4.4 29.0 4.4 190 cpv-p14/8-1s-6pd 1 8.65 4.4 29.0 6.8 190 cpv-p14/8-1s-6pdl 22 3.87 2 2.0 29.0 4.4 2 x 85.1 cpv-p14/8-2s-6pd 22 3.87 2 2.0 29.0 6.8 2 x 85.1 cpv-p14/8-2s-6pdl
2008 sep 01 1046 ferroxcube pt, pts, pts/i cores and accessories pts14/8 (1408ths) data sheet status definitions disclaimer life support applications ? these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify ferroxcube for any damages resulting from such application. product status definitions data sheet status product status definitions preliminary specification development this data sheet contains prelimin ary data. ferroxcube reserves the right to make changes at any time without not ice in order to improve design and supply the best possible product. product specification production this data sheet contains final specifications. ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. status indication definition prototype these are products that have been made as development samples for the purposes of technical evaluation only. the data for these types is provisional and is subject to change. design-in these products are recommended for new designs. preferred these products are recommended for use in current designs and are available via our sales channels. support these products are not recommended for new designs and may not be available through all of our sales channels. customers are advised to check for availability.
|
